How To Fix Xbox Series X HDMI Not Working

Replacing the cable, power cycling the Xbox, and cleaning the console are some of the few methods that can help solve the issue.

If your Xbox Series X HDMI is not working, you’re not alone. The issue can happen to anyone, but there are several methods through which you can fix the fix issue.

Key Takeaways

A user tries to create a link between the Xbox and TV via HDMI, but the screen either shows a No Signal error message, the display becomes static, or it turns blank. It indicates a connection glitch between the display device and the Xbox consoles, which can occur due to system malfunctions or even hardware defects.

Common Causes of why Xbox Series X HDMI Might Not Work:

If you’re unable to make it work, we recommend you follow the methods mentioned below:

If your HDMI cable or console’s power cable is damaged, then it can cause a hindrance in your Xbox and HDMI connection. Also, ensure that the pins are not bent or defective in any way, as it can also cause the connection issue you’re facing.

So, to fix the error, replace the defective hardware with new cables and pins or repair them. Also, clean the ports and pins using a blower or blow through your mouth to remove all the dirt inside.

To connect your Xbox to the TV via HDMI, ensure that the selection of HDMI input port number and the HDMI source on the TV is the same. If your TV has several ports and the HDMI port is plugged into the HDMI2 slot on the TV, but the source on the TV is set at HDMI1, it results in a connection error.

To align the source and port input, look for the number of ports to which your Xbox is connected, then select accordingly from your TV settings. Here’s how to do it:

Power cycling is an effective problem solver if the error rises due to a glitch in TV firmware or your console.

Here’s how:

Here’s how to power cycle your TV:

Sometimes, Xbox fails to connect to HDMI if the user plugs the cords into incorrect ports. Also, if HDMI ports are faulty and not working properly, it can be the culprit behind your No Signal error.

Two HDMI ports are available in Xbox, an IN and an OUT port. Proper linking of HDMI slots to correct sources is necessary to avoid connection errors.

HDMI IN connects other devices to your Xbox, which you can use through the consoles. In contrast, HDMI OUT connects your Xbox to a screen through an HDMI cable, which enables Xbox to connect and stream to the TV display.

So, check if all HDMI cables are working properly and plugged into their right ports. In case of any faulty connections between ports and cords, rectify the linking, and your error will be resolved.

Another fix that you can perform when your Xbox Series X or Xbox Series S shows the No Signal error is to reset the display settings of your Xbox console and launch it in low-resolution mode by following some simple steps.

Here’s how:

Your Xbox will now be launched in low-resolution mode that is 640 x 480. This method will help you remove any resolution-related glitches. Now, you can reset the resolution by following a few steps.

Here’s how to do it:

When your console needs to be updated, but there are too many external devices attached, it results in overloading, due to which update installation fails.

Sometimes, the HDMI connection with Xbox fails due to these burdensome external devices or uninstalled updates. To fix the error, detach all the external devices except the power cord, HDMI cable, and Ethernet cable if you’re using one and update the console.

Here’s how:

If the user doesn’t clean up the consoles properly, dirt accumulates in the HDMI ports, which creates the HDMI connection barrier in Xbox.

Also, debris can clog up the Xbox console’s air vents, which can also cause issue when the user tries to connect to HDMI. So, to fix the issue, clean your Xbox.

Try factory resetting your Xbox to fix the No Signal HDMI connection error on Xbox.

Here’s how to perform the operation:

Turn off the console by pressing the Xbox button briefly and hold on till the light on your console’s face stops blinking. After the Xbox turns off properly, take out the power cord and wait for at least a minute before connecting it back.

Now, turn on your Xbox and see if the error persists or goes away by following this method.

Also Read: How To Fix Xbox Series S Won’t Turn On Issue

24Hz mode seems amazing to enjoy a cinematic experience, but it can disrupt your TV’s functionality if your display cannot handle the lower refresh rate.

Here’s what you need to do:

If you’re trying to link an AVR device to your Xbox, but there’s no sound or display, and the connection fails due to an error. You can reset the AVR configuration to fix the Xbox Series S no signal to TV HDMI issue.

Here is how to modify the settings:

If you’re an Xbox Series X and Series S console user and your TV supports Variable Refresh Rate (VRR), you won’t be able to enjoy a successful HDMI connection, and No Signal error will appear on the screen. In this case, you can fix the glitch by disabling VRR from your TV’s settings.

Here’s how to do it:

In case the issue persists and your Xbox Series X HDMI is not working, there may be an issue with your Xbox Series X or Xbox Series S and you need to get it checked.

So, if the faulty hardware is still covered in the manufacturer’s warranty, you can get it replaced for free. Otherwise, ship it to the company, and Xbox will return it to you after making the necessary repairs so you can proceed without the error.

You can contact the Xbox Support team, who will instruct you on resolving the error. Microsoft customer service offers various ways to get in touch with Xbox professionals for expert advice on error resolution.

Visit the support webpage or avail of the 24/7 online chat service. You can also request a call with the Xbox customer care representative from Monday to Sunday, 6 AM to 5 PM Pacific Time.

The HDMI may not be working due to problems with the cable, dust in the ports, and hardware defects.

Try replacing the cable, cleaning the console, and power cycling it to fix the issue.

You will need to take it to a repair shop to get it checked by experts. They will either fix the current port or replace it with a new one.

Related Articles

Thank you! Please share your positive feedback. 🔋

How could we improve this post? Please Help us. 😔

Save my name, email, and website in this browser for the next time I comment.